CADflow

User Guide
×
  (c) MonkeyFlow, 2023

Installation

 
Carefully follow the guidelines below to install and configure CADflow.
 
The CADflow MSI file installs all data to the folder C:\Program Files\MonkeyFlow and will do the following:
  • Automatically loads the CADflow ribbon into Autodesk® AutoCAD® / Autodesk® AutoCAD LT® / Bricsys® BricsCAD®.
  • Copies the CADflow Plot Configuration (PC3 and PMP) files to the installation folder, then copies them to the correct location on your PC as configured in AutoCAD / BricsCAD.
  • Copies the CADflow title sheet DWT files to the installation folder, then copies them to the correct location on your PC as configured in AutoCAD / BricsCAD.
  • Copies the CADflow Plot Styles (CTB) files to the installation folder, then copies them to the correct location on your PC as configured in AutoCAD / BricsCAD.
  • Sets the Support Files Search Path and Trusted Locations location paths in AutoCAD / BricsCAD.
 
Once setup is completed we advise reading the pages Title Sheets (DWT) Files and Plot Style (CTB) Files.
 
1.   Close all running versions of AutoCAD / BricsCAD.
 
2.   Double click the CADflow installation MSI file.
 
3.   Follow the instructions on the screens to install.
CADflow will be installed to the folder C:\Program Files\MonkeyFlow.
 
4.   The final install screen is shown below, ensure the View readme file box is checked to open the User Guide.
 
5.   Open AutoCAD / BricsCAD - the CADflow ribbon will load into the interface automatically.
Should you wish to use the CADflow pull down menu type MENUBAR at the command prompt and set to 1.
 
6.   CADflow should now be installed and activated.
The auto-load of CADflow may encounter issues if CAD configurations have been changed from default settings.
Should your CADflow not be loaded please follow the steps outlined in the Troubleshooting FAQ section.